The Corsa B EPAS was off ebay.
It has the normal Corsa B ECU but that needs a speed and rev signal, you can buy the controllers but they need constant ‘playing’ as unlike the original they don’t adjust for speed so if you set it for town it’ll be too light while moving etc.
I’ll be making my own controller for it which will give it a proper speed signal *and* allow that to be adjusted (probably with a ‘park’ button too).
I have been looking into building a GT Forte kit myself as it is significantly cheaper than the other companies, but have read various good and bad things about them. I just wondered if you could tell me if you’ve had any issues before I part with my hard earned cash.
thanks for replying, I am actually trying to get a hold of Doug but i couldn’t find an email or any type of contact… kind of frustrating. so I got the adaptor plate and flywheel file on his site, is that all that is needed?
Your GT40 build looks great! Would you mind telling me where you bought your Corsa B EPAS? Also, what type of controller will you be using?
Thanks and keep up the good work !
David Nunn
The Corsa B EPAS was off ebay.
It has the normal Corsa B ECU but that needs a speed and rev signal, you can buy the controllers but they need constant ‘playing’ as unlike the original they don’t adjust for speed so if you set it for town it’ll be too light while moving etc.
I’ll be making my own controller for it which will give it a proper speed signal *and* allow that to be adjusted (probably with a ‘park’ button too).
Hi,
I have been looking into building a GT Forte kit myself as it is significantly cheaper than the other companies, but have read various good and bad things about them. I just wondered if you could tell me if you’ve had any issues before I part with my hard earned cash.
Cheers
I’ve been bad at updating it I’m afraid. Lots of progress, I probably should put an update up!
Just found your build log and I wanted to see the progress you’ve made in the last 2 years? It looks like you haven’t updated this since August 2014.
Thank you,
Dan
hello, I am in progress of adapting the 1uz to the Audi 012 transmission. I wonder where did you get the adaptor kit for your build?
thanks,
Leslie
Hi Leslie,
It wasn’t a kit. I just got them waterjet cut and machined from these designs – http://guerillamotive.com/wordpress/?page_id=183
thanks for replying, I am actually trying to get a hold of Doug but i couldn’t find an email or any type of contact… kind of frustrating. so I got the adaptor plate and flywheel file on his site, is that all that is needed?
thanks again, your build is invaluable to me.
best ,
Leslie